LCD 16x2 Alphanumeric Display (JHD162A) for 8051, AVR, Arduino, PIC, ARM

₹ 190.00

In-Stock: 24

Category: Display Collections

Description:

Description :

16x2 LCD means it can display 16 characters per line and there are 2 such lines. In this LCD each character is displayed in 5x7 pixel matrix. This LCD has two registers, namely, Command and Data.

 

Pin Configuration

Pin No:

Pin Name:

Description

1

Vss (Ground)

Ground pin connected to system ground

2

Vdd (+5 Volt)

Powers the LCD with +5V (4.7V – 5.3V)

3

VE (Contrast V)

Decides the contrast level of display. Grounded to get maximum contrast.

4

Register Select

Connected to Microcontroller to shit between command/data register

5

Read/Write

Used to read or write data. Normally grounded to write data to LCD

6

Enable

Connected to Microcontroller Pin and toggled between 1 and 0 for data acknowledgement

7

Data Pin 0

 

 

Data pins 0 to 7 forms a 8-bit data line. They can be connected to Microcontroller to send 8-bit data.

These LCD’s can also operate on 4-bit mode in such case Data pin 4,5,6 and 7 will be left free.

8

Data Pin 1

9

Data Pin 2

10

Data Pin 3

11

Data Pin 4

12

Data Pin 5

13

Data Pin 6

14

Data Pin 7

15

LED Positive

Backlight LED pin positive terminal

16

LED Negative

Backlight LED pin negative terminal

 

Features of 16×2 LCD module

  • Operating Voltage is 4.7V to 5.3V
  • Current consumption is 1mA without backlight
  • Alphanumeric LCD display module, meaning can display alphabets and numbers
  • Consists of two rows and each row can print 16 characters.
  • Each character is build by a 5×8 pixel box
  • Can work on both 8-bit and 4-bit mode
  • It can also display any custom generated characters
  • Available in Green and Blue Backlight